In the wholesale industry, diamonds are sorted according to carat weight (among other characteristics). The sizes of 0.44ct. to 0.49ct. are considered to be "light half carats". However, when selling a diamond to a consumer, the retailer cannot represent these as half carat diamonds. A half carat must weigh at least 0.50ct. A one carat must weigh at least 1.00ct.
It's an effect seen through a viewer which shows a particular symmetry and alignment of the facets on the diamond. Not all "hearts & arrows" would achieve an AGS Ideal® Cut grade. Likewise, not all AGS Ideal Cut diamonds show the “hearts & arrows".
The American Gem Society diamond grading system addresses more than just the proportions or symmetry of a diamond. The Performance-based grading uses state of the art technology to analyze and evaluate all 58 facets in three dimensions. The resulting performance can be viewed with the ASET® device. See images of the ASET device grading diamond quality based on the red, green, and blue colors as well as pattern and symmetry.
For more information about diamonds and their performance, visit an American Gem Society jeweler and ask to speak to a Registered Jeweler, Certified Gemologist, or Certified Gemologist.
The American Gem Society is home to a diamond grading lab to ensure consistent, consumer-oriented diamond grading reports. These diamond grading reports provide detailed information about diamonds - including cut - which is most important to its beauty.
Use the link in the above paragraph and also be sure to have the report number and weight of the diamond.
You should receive information on your receipt which includes the diamond’s carat weight, shape, measurements, cut, color, and clarity grades. Some jewelers also provide a separate document called a Statement of Replacement Cost, which is suitable to give to your insurance company to obtain insurance to cover damage or loss to the diamond. American Gem Society retail members also provide a diamond quality certificate to ensure the authenticity and quality of the diamond you are purchasing.
If the diamond is set into a mounting, that information should be provided too -- including the metal and a description of the style, manufacturing technique, and weight in grams or pennyweights. A picture is good to have as well -- but not without the other information. By the way, the Statement of Replacement Cost document should explain the grading terminology used to determine the value of the item and a listing of the equipment used. For example, a 10-power binocular microscope was used to judge clarity; a set of Master Diamonds were used to determine the color grade.
For more information about professional documentation of diamonds and jewelry, consult either a Certified Gemologist Appraiser or Independent Certified Gemologist Appraiser of the American Gem Society.
This term has been used to describe a diamond which has the highest grade (which is 0) for proportions, symmetry, and polish. However, the AGS Performance grading for the cut of a diamond now assesses the performance, proportions, and finish. That’s still three categories, but the finish includes both symmetry and polish, technically addressing four categories.
According to the Diamond Standards of the American Gem Society, for a diamond to receive a grade of AGS Ideal, it must achieve an AGS Ideal grade for its cut, color, and clarity. This means the best cut of a colorless and flawless diamond of any size.
AGS Triple Zero®, AGS Ideal®, AGS Triple 0®, and AGS 0®, are all registered trademarks.
It’s a challenge for a consumer to re-sell their diamond or other jewelry. This is because of the limited market to sell it in. A jeweler is in the business of selling jewelry to consumers and purchasing jewelry from a manufacturer or supplier. When a consumer wants to sell an item, the jeweler will typically offer less than they would pay to their regular suppliers.
As you found, some jewelers offer trade-ins as another option. This can present a better value to the consumer. There are jewelers who actively look for diamonds to purchase from individuals. This information may be in their advertising or listed on their website. I suggest you contact at least three sources. However, the reality is that if a diamond has a replacement value of $8300, your offers may be less than half of that.
With the current state of the economy and the high value of gold today, many people are searching their jewelry boxes for instant cash. Here are some facts:
Pure gold is 24 karat yellow – 10 karat is 10/24 gold; 14 karat is 14/24 gold and 18 karat is 18/24 gold. (The rest is a metal alloy.)
How is the worth of the gold figured? Here’s an example:
Price of 24 karat gold -- $1000/ounce (changes daily)
14 karat is .585 (58% gold)
Weight is in pennyweight (dwt) or grams (gr)
There are approximately 20dwt/ounce; 31.1grams/ounce
The weight of our 14 karat example is 10gr (heavy wedding band):
$1000 / 31.1gr = $32.15 per gram of 24 karat gold
$32.15 X .585 = $18.81 per gram of 14 karat gold
$18.81 X 10 grams = $188.10 gold value
Now, deduct the cost to send the gold to a refiner, and the refining costs. Depending on the quantity of gold sent to the refiner, those costs could vary. For example, you wouldn’t want to send in 10 grams of gold for refining. A jeweler would wait until he or she had a sizeable quantity, perhaps 10 ounces or more.
If you are offered 50% of the “gold value”, that’s $94.05; 10% is $18.81. That’s quite a range. What’s fair? The informed consumer can make that decision.
Finding a jeweler you can trust can be as difficult as locating a good doctor or as scary as using a new hair stylist! I recommend an American Gem Society member who has met the strict requirements for membership that include professional credentials and a commitment to consumer protection. Find the AGS certified jewelry stores in your area now.
Not all jewelers offer a repair service. You should call or visit to inquire. Some jewelers use an independent bench jeweler who performs the work at his or her own location. You should know that your item is insured while in the jewelry store – or at the jewelers – and we suggest you agree on a replacement value before you leave it.
All members of the American Gem Society are required to own a microscope. You can be shown a characteristic of your diamond before you leave it, and then view it again when you pick it up. This is one way to help you feel secure that your diamond is returned to you.
You need the expertise of a Certified Gemologist™ (CG) or Certified Gemologist Appraiser (CGA) of the American Gem Society. They have the education and gemological equipment (an Accredited Gem Lab) to identify color gemstones.
If the stones are rough rather than polished, it could present a challenge for identification. A gemologist needs a polished surface in order to conduct an important test called a refractive index. Sometimes a piece of rough has enough of a smooth surface to conduct this test. It's best to visit a CG or CGA and get an estimate for the identification. You can then decide if you want to proceed. If they are unable to make an ID, they may recommend someone else.
The only professional way to proceed is to consult a credentialed gemologist/appraiser who might need to perform gemological testing to determine the species of the light blue stones, and the origin of the pearls -- natural, cultured or imitation. If there is a charge for this service, you should be advised of the amount before you decide to proceed.
A Certified Gemologist or Certified Gemologist Appraiser of the American Gem has the education, experience, and ethics to test the stones and value your two necklaces.
Get a list of AGS certified jewelry appraisers in your area now.
It is so important to consult a credentialed appraiser who has education and experience in gemology and appraising. The American Gem Society provides a list of Certified Jewelry Appraisers where you can search by state for either a Certified Gemologist Appraiser or an Independent Certified Gemologist Appraiser.
You have provided information on only 3 of the 4Cs. The most important element to the diamond’s value is its Cut quality. Also, it’s not possible to accurately value a diamond that is not personally examined by the appraiser-- just as you can’t judge the beauty of the diamond without seeing it!
Contact a professional gemologist/appraiser, such as a Certified Gemologist Appraiser of the American Gem Society. They have the education, experience, and ethics to best advise you on the value of the diamond. Be careful, because the lowest price is not always the best value. Find the AGS certified jewelry appraisers in your area now.
AGS members that meet the Society's qualifications and equipment requirements receive the designation "Accredited Gem Laboratory" of the American Gem Society, or AGL. They are required to be operated in a professional and ethical manner by Certified Gemologists, Certified Gemologist Appraisers, or Independent Certified Gemologist Appraisers.
According to the Federal Trade Commission’s guidelines, jewelry does not have to be marked with the quality of the metal; however, if the item is stamped with the gold content (or other metal), it must also be marked with the maker's initials or trademark. For more information about markings and other jewelry guidelines, visit www.ftc.gov and search "jewelry guides".
Many times it is the nickel alloy used to make white gold which causes an allergic reaction. When the ring was new, it may have had a rhodium finish to make the white gold appear brighter. The reaction could result after the plating wears away.
You can have the ring plated again; however, it is not inexpensive. Rhodium is a metal from the platinum group of metals and is rare and expensive. For a ring, the plating rarely lasts a year before it wears away again.
I have heard of “painting" the inside of the ring with clear nail polish. Both options are temporary! You may want to consider a different metal for the ring, Depending on the style, this could be a very expensive option, but one that would last a lifetime. You might want to consider platinum or palladium, both are a pure white metal which is hypoallergenic. Consult your jeweler or a member of the American Gem Society for further advice.
The American Gem Society (AGS) is a nonprofit trade association of fine jewelry professionals dedicated to setting,
maintaining and promoting the highest standards of ethical conduct and professional behavior through education,
accreditation, recertification of its membership, gemological standards, and gemological research.
The Society is committed to providing educational products to inform and protect the consumer and to contributing to the betterment of the trade by creating industry standards to protect the jewelry-buying public and the fine jewelry industry as a whole.
AGS Laboratories, founded to support the AGS mission, is a nonprofit diamond grading laboratory with a mission of
consumer protection. Adhering to the AGS Diamond Grading Standards, AGS Laboratories is dedicated to offering diamond grading reports that provide consistency and accuracy based on science.